# GPIO vervenden #

## Installation ##

### Um neue Software zu suchen

1. sudo apt-get update
2. sudo apt-get upgrade


### GPIO Software installieren

1. sudo apt-get install python-dev
2. sudo apt-get install python-rpi.gpio


### Adafruit Beispiele installieren

1. sudo apt-get install git
2. git clone http://github.com/adafruit/Adafruit-Raspberry-Pi-Python-Code.git
3. cd Adafruit-Raspberry-Pi-Python-Code
4. ls

## Wo ist welcher PIN?

[[ http://pinout.xyz/ ]]


##Eine LED verbinden
<img src="https://cdn-learn.adafruit.com/assets/assets/000/024/147/medium640/raspberry_pi_little_cobbler_bb.png?1427733019" alt="LED mit Raspberry Pi verbinden">
Bild von adafruit.com

##LED mit Python-Interpreter steuern

import RPi.GPIO as GPIO ## Import GPIO library
import time ## Damit man Warten kann

GPIO.setmode(GPIO.BOARD) ## Use board pin numbering
GPIO.setup(7, GPIO.OUT) ## Setup GPIO Pin 7 to OUT

GPIO.output(7,True) ## Schalte GPIO pin 7 an
GPIO.output(7,False) ## Schalte GPIO pin 7 an

GPIO.cleanup() ## Um das ganze sauber zu beenden


## Kleines Blink-Programm
<pre>
import RPi.GPIO as GPIO ## Import GPIO library
import time ## Import 'time' library. Allows us to use 'sleep'

GPIO.setmode(GPIO.BOARD) ## Use board pin numbering
GPIO.setup(7, GPIO.OUT) ## Setup GPIO Pin 7 to OUT

##Define a function named Blink()
def Blink(numTimes,speed):
    for i in range(0,numTimes):## Run loop numTimes
        print "Iteration " + str(i+1)## Print current loop
        GPIO.output(7,True)## Switch on pin 7
        time.sleep(speed)## Wait
        GPIO.output(7,False)## Switch off pin 7
        time.sleep(speed)## Wait
    print "Done" ## When loop is complete, print "Done"
    GPIO.cleanup()

## Ask user for total number of blinks and length of each blink
iterations = raw_input("Enter total number of times to blink: ")
speed = raw_input("Enter length of each blink(seconds): ")

## Start Blink() function. Convert user input from strings to numeric data types and pass to Blink() as parameters
Blink(int(iterations),float(speed))
</pre>


## Beispiel für Luftfeuchte- und Temperatursensor

<img src="https://cdn-learn.adafruit.com/assets/assets/000/001/860/original/raspberry_pi_dht11wiring.gif?1447864313  alt="DHT-Sensor mit Raspberry Pi verbinden">
Bild von adafruit.com

1. sudo apt-get install build-essential python-dev python-openssl
2. git clone https://github.com/adafruit/Adafruit_Python_DHT.git
3. cd Adafruit_Python_DHT/
4. sudo python setup.py install
5. cd examples/
6. sudo ./AdafruitDHT.py 11 4



## Links

[[ http://www.thirdeyevis.com/pi-page-2.php ]]

[[ https://learn.adafruit.com/dht-humidity-sensing-on-raspberry-pi-with-gdocs-logging/overview ]]

[[ https://learn.adafruit.com/adafruits-raspberry-pi-lesson-4-gpio-setup/overview ]]