attachment upload

1 files changed, 114 insertions, 0 deletions

diff --git a/Equipment/3D-Drucker/Basic_Huxley_config.ini b/Equipment/3D-Drucker/Basic_Huxley_config.ini
new file mode 100644
index 00000000..44dccce9
--- /dev/null
+++ b/Equipment/3D-Drucker/Basic_Huxley_config.ini
@@ -0,0 +1,114 @@
+# generated by Slic3r 0.9.10b on Mon Oct  7 21:32:42 2013
+avoid_crossing_perimeters = 1
+bed_size = 130,130
+bed_temperature = 130
+bottom_solid_layers = 2
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 62
+brim_width = 0
+complete_objects = 0
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
+external_perimeter_speed = 100%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_diameter = 1.75
+fill_angle = 45
+fill_density = 0.2
+fill_pattern = honeycomb
+first_layer_bed_temperature = 130
+first_layer_extrusion_width = 250%
+first_layer_height = 0.35
+first_layer_speed = 30%
+first_layer_temperature = 210
+g0 = 0
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = teacup
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 1
+infill_speed = 40
+layer_gcode = 
+layer_height = 0.4
+max_fan_speed = 120
+min_fan_speed = 50
+min_print_speed = 10
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.5
+only_retract_when_crossing_perimeters = 1
+output_filename_format = [input_filename_base].gcode
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 2
+post_process = 
+print_center = 70,70
+raft_layers = 1
+randomize_start = 1
+resolution = 0
+retract_before_travel = 10
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 10
+retract_lift = 0.2
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+rotate = 0
+scale = 1
+skirt_distance = 3
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 15
+small_perimeter_speed = 30
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 3
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle
+support_material = 
+support_material_angle = 45
+support_material_enforce_layers = 1
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_layers = 1
+support_material_interface_spacing = 5
+support_material_pattern = rectilinear
+support_material_spacing = 5
+support_material_speed = 60
+support_material_threshold = 45
+temperature = 205
+threads = 8
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 40
+top_solid_layers = 2
+travel_speed = 130
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0